Skip to Navigation Skip to Content

Hackers Zone

Home Contact Us About Me Downloads

Hardware Firewall

Download Hardware Firewall and Sentry Firewall . The best firewall is a hardware firewall that is completely separate from your operating system. It need not be a dedicated router, could be an old pentium box running Linux. Below I have found some sites that have How To's on setting up an outside hardware router using an old computer and using a little linux program that fits on a single floppy disk.

Brief Description:
floppyfw is a router with the advanced firewall-capabilities in Linux that fits on one single floppy disc.

Features:
Access lists, IP-masquerading (Network Address Translation), connection tracked packet filtering and (quite) advanced routing. Package for traffic shaping is also available.
Requires only a 386sx or better with two network interface cards, a 1.44MB floppy drive and 12MByte of RAM ( for less than 12M and no FPU, use the 1.0 series, which will stay maintained. )
Very simple packaging system. Is used for editors, PPP, VPN, traffic shaping and whatever comes up. (now this is looking even more like LRP (may it rest in peace) but floppyfw is not a fork.)
Logging through klogd/syslogd, both local and remote.
Serial support for console over serial port.
DHCP server and DNS cache for internal networks.
floppyfw


Sentry Firewall CD-ROM is a Linux-based bootable CDROM suitable for use as an inexpensive and easy to maintain firewall, server, or IDS(Intrusion Detection System) Node. The system is designed to be immediately configurable for a variety of different operating environments via a configuration file located on a floppy disk, a local hard drive, and/or a network via HTTP(S), FTP, SFTP, or SCP.

The Sentry Firewall CD is a complete Linux system that runs off of an initial ramdisk, much like a floppy-based system, and a CD. The default kernel is a current 2.4.x series kernel with various Netfilter patches applied. An OpenWall-patched current 2.2.x kernel is also available on the CD.

Booting from the CDROM is a fairly familiar process. The BIOS execs the bootloader(Syslinux) - which then displays a bootprompt and loads the kernel and ramdisk into memory. Once the kernel is running, the ramdisk is then mounted as root(/). At this point our configuration scripts are run(written in perl) that configure the rest of the system. It is the job of these configure scripts to put the various startup and system files into the proper location using either what is declared in the configuration file(sentry.conf) or the system defaults located in the /etc/default directory.

Most of the critical files used at boot time can be replaced with your own copy when declared in the configuration file. This is essentially how we allow the user to configure the system using his/her own configuration and init files.

All of the binaries, files, scripts, etc, used to create the CD-ROM are also available on the CD-ROM. So, with a little practice, you can easily build and customize your own bootable Sentry Firewall CD. Please see the HOWTO for more details.
Sentry Firewall  
Posted under:

Guide to Slipstreaming Service Pack 2

Here is the Guide to Slipstreaming Service Pack 2..

Note: All images are hosted with ImageShack.

• This guide will allow you to sucsessfully install Service Pack 2 on the original (gold) code of Microsoft Windows XP.
• The version of Windows you have purchased/downloaded does not matter as far as slipstreaming (they're all the same anyway).

Things you need:
• Microsoft Windows XP (duh :P)
• Service Pack 2:
click here to get it....

• Windows XP Boot sector click here to get it.
• Nero Burning Rom (find it on SoD)

Step One
Insert the Microsoft Windows XP CD into your CD-ROM drive, and create a new folder on your hard-drive labelled "CD".

Copy all of the files from the Windows XP CD to the "CD" folder.


Step Two
Download Service Pack 2 and place it within the root of your hard-drive.
Ex: C:\ D:\ etc..


Step Three
Go to Start -> Run and type in "F:\WindowsXP-KB835935-SP2-ENU.exe -s:F:\CD" (depending on where you put the folder)

The actual command is -s:drive:\folder


Step Four
The Service Pack 2 updater will automatically slipstream Service Pack 2 into your "CD" folder.


Step Five
If you browse back to the CD folder, you'll notice that new folders and files appeared from the SP2 update. At this point, you can include any software you wish onto this CD, but make sure that the size of the folder does not exceed the media you are burning on. If you're not sure, a regular CD is 700 megabytes.


Step Six

Go to Start and Search for files and folders. Go to all files and folders, and type in "wpa.dbl". This is the activation file for your current installed version of XP. Make a copy of the file and paste it into your CD folder.


Step Seven
Open up Nero Smartstart, and click on the icon that looks like two people. This turns the program into "professional mode". Search for create a bootable CD. Click on it, and make sure that your settings agree with the following picture; also make sure that you downloaded the Windows XP boot sector.


Step Eight
Continue onto the next tab, and make sure that your settings agree with the picture:


Step Nine
In this step, you can label your CD whatever the hell you want. I recommend WXPSP2_EN.


Step Ten
Go to "new" and locate your CD folder. Drag all of the files in the CD folder to the compilation window on the right, and nero will calculate how much disk space was used. If it exceeds 700 MB, get rid of some programs that you added to the CD. If you didn't add anything; just push burn.


Step Eleven
Make sure that your settings check with the picture:


Step Twelve
Just push burn, and that's it! Congratulations, you just made a bootable Win XP CD with SP2 slipstreamed!


 
Posted under:

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Walls 4 Adobe Photoshop Cs 8.0

Graffiti On Wall Tutorial For
Photoshop Cs 8.0

For This Tutorial You Must Have A Basic Understanding Of Adobe Photoshop Cs 8.0, Example : Where The Features Of The Program Are.

For This Tutorial You Will Need The Font Called Political Graffiti Fill Which Can Be Aquired Here and The Starting Wall Picture Which Can be Aquired Here.

Now!!!

(1). Open Photoshop Cs 8.0

(2). Open Wall Picture

(3). Type Ur Second Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(4). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(5). Distort Style Squeeze Vertical, Bend = -31%, Horizontal Distortion = +18%, Vertical Distortion = +34%

(6). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(7). Type Ur First Name In Red At 210pt Font Size In The Political Graffiti Fill Font.

(8). Click Icon All The Way At The Topright That Looks Like A T With A Rounded Line Under It. (Warp Text)

(9). Distort Style Squeeze Vertical, Bend = +50%, Horizontal Distortion = 0%, Vertical Distortion = -31%

(10). Layer> Layer Style> Blending Options, General Blending> Opacity 79%> Fill Opacity 100%, Blend If: Gray, Underlying Layer Black 60, White 210

(11). Duplicate Both Layers

(12). Move Copied Layers One On Top Of The Other (In The Layer Menu)

(13). Hide The Original Ur Second Name And Ur First Name Layers By Clicking The Eye Icons So That They Dissapear.

(14). In The Copies, Right Click (One At A Time) And Click Rasterize Layer.

(15). Go to Layer> Merge Down (Ctrl + E) (On Top Name Layer).

(16). Layer> Layer Style> Stroke Change Color To Black, Size to 8, Then Opacity To 68%.

(17). Save If No Blur Effect Wanted

(18). Filter> Blur> Smart Blur> Mode: Overlay Edges, Threshhold 48%, Radius 6, Quality: High.

(19). Layer> New Layer

(20) Brush Tool (B), Paint Brush With The Soft 16pt Airbrush For Spraypaint Effect.

(21). Smuge Around Graffiti For Paint Smudge Look For Good Effect (Optional)

(22). Save.


Finito

Final Images:

Graffiti With Blur get here

Graffiti No Blur get here

 
Posted under:

Keyboard Shortcuts

Get all Keyboard Shortcuts here which are very useful to us...

General Keyboard Shortcuts:
CTRL+C (Copy)
CTRL+X (Cut)
CTRL+V (Paste)
CTRL+Z (Undo)
DELETE (Delete)
SHIFT+DELETE (Delete the selected item permanently without placing the item in the Recycle Bin)
CTRL while dragging an item (Copy the selected item)
CTRL+SHIFT while dragging an item (Create a shortcut to the selected item)
F2 key (Rename the selected item)
CTRL+RIGHT ARROW (Move the insertion point to the beginning of the next word)
CTRL+LEFT ARROW (Move the insertion point to the beginning of the previous word)
CTRL+DOWN ARROW (Move the insertion point to the beginning of the next paragraph)
CTRL+UP ARROW (Move the insertion point to the beginning of the previous paragraph)
CTRL+SHIFT with any of the arrow keys (Highlight a block of text)
SHIFT with any of the arrow keys (Select more than one item in a window or on the desktop, or select text in a document)
CTRL+A (Select all)
F3 key (Search for a file or a folder)
ALT+ENTER (View the properties for the selected item)
ALT+F4 (Close the active item, or quit the active program)
ALT+ENTER (Display the properties of the selected object)
ALT+SPACEBAR (Open the shortcut menu for the active window)
CTRL+F4 (Close the active document in programs that enable you to have multiple documents open simultaneously)
ALT+TAB (Switch between the open items)
ALT+ESC (Cycle through items in the order that they had been opened)
F6 key (Cycle through the screen elements in a window or on the desktop)
F4 key (Display the Address bar list in My Computer or Windows Explorer)
SHIFT+F10 (Display the shortcut menu for the selected item)
ALT+SPACEBAR (Display the System menu for the active window)
CTRL+ESC (Display the Start menu)
ALT+Underlined letter in a menu name (Display the corresponding menu)
Underlined letter in a command name on an open menu (Perform the corresponding command)
F10 key (Activate the menu bar in the active program)
RIGHT ARROW (Open the next menu to the right, or open a submenu)
LEFT ARROW (Open the next menu to the left, or close a submenu)
F5 key (Update the active window)
BACKSPACE (View the folder one level up in My Computer or Windows Explorer)
ESC (Cancel the current task)
SHIFT when you insert a CD-ROM into the CD-ROM drive (Prevent the CD-ROM from automatically playing)
Dialog Box Keyboard Shortcuts
CTRL+TAB (Move forward through the tabs)
CTRL+SHIFT+TAB (Move backward through the tabs)
TAB (Move forward through the options)
SHIFT+TAB (Move backward through the options)
ALT+Underlined letter (Perform the corresponding command or select the corresponding option)
ENTER (Perform the command for the active option or button)
SPACEBAR (Select or clear the check box if the active option is a check box)
Arrow keys (Select a button if the active option is a group of option buttons)
F1 key (Display Help)
F4 key (Display the items in the active list)
BACKSPACE (Open a folder one level up if a folder is selected in the Save As or Open dialog box)
Microsoft Natural Keyboard Shortcuts
Windows Logo (Display or hide the Start menu)
Windows Logo+BREAK (Display the System Properties dialog box)
Windows Logo+D (Display the desktop)
Windows Logo+M (Minimize all of the windows)
Windows Logo+SHIFT+M (Restore the minimized windows)
Windows Logo+E (Open My Computer)
Windows Logo+F (Search for a file or a folder)
CTRL+Windows Logo+F (Search for computers)
Windows Logo+F1 (Display Windows Help)
Windows Logo+ L (Lock the keyboard)
Windows Logo+R (Open the Run dialog box)
Windows Logo+U (Open Utility Manager)
Accessibility Keyboard Shortcuts
Right SHIFT for eight seconds (Switch FilterKeys either on or off)
Left ALT+left SHIFT+PRINT SCREEN (Switch High Contrast either on or off)
Left ALT+left SHIFT+NUM LOCK (Switch the MouseKeys either on or off)
SHIFT five times (Switch the StickyKeys either on or off)
NUM LOCK for five seconds (Switch the ToggleKeys either on or off)
Windows Logo +U (Open Utility Manager)
Windows Explorer Keyboard Shortcuts
END (Display the bottom of the active window)
HOME (Display the top of the active window)
NUM LOCK+Asterisk sign (*) (Display all of the subfolders that are under the selected folder)
NUM LOCK+Plus sign (+) (Display the contents of the selected folder)
NUM LOCK+Minus sign (-) (Collapse the selected folder)
LEFT ARROW (Collapse the current selection if it is expanded, or select the parent folder)
RIGHT ARROW (Display the current selection if it is collapsed, or select the first subfolder)
Shortcut Keys for Character Map
After you double-click a character on the grid of characters, you can move through the grid by using the keyboard shortcuts:
RIGHT ARROW (Move to the right or to the beginning of the next line)
LEFT ARROW (Move to the left or to the end of the previous line)
UP ARROW (Move up one row)
DOWN ARROW (Move down one row)
PAGE UP (Move up one screen at a time)
PAGE DOWN (Move down one screen at a time)
HOME (Move to the beginning of the line)
END (Move to the end of the line)
CTRL+HOME (Move to the first character)
CTRL+END (Move to the last character)
SPACEBAR (Switch between Enlarged and Normal mode when a character is selected)
Microsoft Management Console (MMC) Main Window Keyboard Shortcuts
CTRL+O (Open a saved console)
CTRL+N (Open a new console)
CTRL+S (Save the open console)
CTRL+M (Add or remove a console item)
CTRL+W (Open a new window)
F5 key (Update the content of all console windows)
ALT+SPACEBAR (Display the MMC window menu)
ALT+F4 (Close the console)
ALT+A (Display the Action menu)
ALT+V (Display the View menu)
ALT+F (Display the File menu)
ALT+O (Display the Favorites menu)
MMC Console Window Keyboard Shortcuts
CTRL+P (Print the current page or active pane)
ALT+Minus sign (-) (Display the window menu for the active console window)
SHIFT+F10 (Display the Action shortcut menu for the selected item)
F1 key (Open the Help topic, if any, for the selected item)
F5 key (Update the content of all console windows)
CTRL+F10 (Maximize the active console window)
CTRL+F5 (Restore the active console window)
ALT+ENTER (Display the Properties dialog box, if any, for the selected item)
F2 key (Rename the selected item)
CTRL+F4 (Close the active console window. When a console has only one console window, this shortcut closes the console)
Remote Desktop Connection Navigation
CTRL+ALT+END (Open the Microsoft Windows NT Security dialog box)
ALT+PAGE UP (Switch between programs from left to right)
ALT+PAGE DOWN (Switch between programs from right to left)
ALT+INSERT (Cycle through the programs in most recently used order)
ALT+HOME (Display the Start menu)
CTRL+ALT+BREAK (Switch the client computer between a window and a full screen)
ALT+DELETE (Display the Windows menu)
CTRL+ALT+Minus sign (-) (Place a snapshot of the active window in the client on the Terminal server clipboard and provide the same functionality as pressing PRINT SCREEN on a local computer.)
CTRL+ALT+Plus sign (+) (Place a snapshot of the entire client window area on the Terminal server clipboard and provide the same functionality as pressing ALT+PRINT SCREEN on a local computer.)
Microsoft Internet Explorer Navigation
CTRL+B (Open the Organize Favorites dialog box)
CTRL+E (Open the Search bar)
CTRL+F (Start the Find utility)
CTRL+H (Open the History bar)
CTRL+I (Open the Favorites bar)
CTRL+L (Open the Open dialog box)
CTRL+N (Start another instance of the browser with the same Web address)
CTRL+O (Open the Open dialog box, the same as CTRL+L)
CTRL+P (Open the Print dialog box)
CTRL+R (Update the current Web page)
CTRL+W (Close the current window)
 
Posted under:
Enrique - Do u know