Here is the process for formatting an HDD when FDISK won't.......
***
This is my favorite way to wipe it clean:
CAUTION: This debug script is for advanced users only. Its Purpose is to remove all formatting and partitioning information from your hard disk when FDISK is unable to do so. THIS WILL REMOVE ALL DATA AND PROGRAMS FORM THE DRIVE.
1. Create a MSDOS bood disk with Debug
2. At DOS command prompt type the following: Debug[Enter] (Where enter is to press the enter key once)
NOTE: Type the following bolded text only. You will recieve an error if you type anything other than the bold text. The non-bolded text represents what will appear on you screen once you press [Enter] after each command.
-F 200 L1000 0 [Enter]
-A CS:100 [Enter]
xxxx:0100 MOV AX,301 [Enter]
xxxx:0103 MOV BX,200 [Enter]
xxxx:0106 MOV CX,1 [Enter]
xxxx:0109 MOV DX,80 [Enter]
NOTE: ( --- "80" for hd0, "81" for hd1)
xxxx:010c INT 13 [Enter]
xxxx: 010e INT 20 [Enter]
xxxx: 0110 [Enter]
-G [Enter]
"Program terminated normally"
3. Turn off the computer. On the next startup the hard drive will need to be partitioned and formatted.
***
***
This is my favorite way to wipe it clean:
CAUTION: This debug script is for advanced users only. Its Purpose is to remove all formatting and partitioning information from your hard disk when FDISK is unable to do so. THIS WILL REMOVE ALL DATA AND PROGRAMS FORM THE DRIVE.
1. Create a MSDOS bood disk with Debug
2. At DOS command prompt type the following: Debug[Enter] (Where enter is to press the enter key once)
NOTE: Type the following bolded text only. You will recieve an error if you type anything other than the bold text. The non-bolded text represents what will appear on you screen once you press [Enter] after each command.
-F 200 L1000 0 [Enter]
-A CS:100 [Enter]
xxxx:0100 MOV AX,301 [Enter]
xxxx:0103 MOV BX,200 [Enter]
xxxx:0106 MOV CX,1 [Enter]
xxxx:0109 MOV DX,80 [Enter]
NOTE: ( --- "80" for hd0, "81" for hd1)
xxxx:010c INT 13 [Enter]
xxxx: 010e INT 20 [Enter]
xxxx: 0110 [Enter]
-G [Enter]
"Program terminated normally"
3. Turn off the computer. On the next startup the hard drive will need to be partitioned and formatted.
***
Posted under:
Process or procedure for Dual Boot after the fact.....
I want to run both Windows 2000 Pro and Windows 98 SE on my computer. When I bought a new hard drive, I installed Windows 2000 on it first. But my subsequent research seems to indicate that I should have installed Windows 98 SE first and then Windows 2000 on a separate partition. How do I remove Windows 2000 from the drive so I can partition it and then install Windows 98 SE first and reinstall Windows 2000?
You don't have to remove Windows 2000. Start by installing Windows 98 SE in a different partition. When you're done, insert the Windows 2000 CD and reboot to start Windows 2000 setup. On the Welcome to Setup page, press R (for Repair). When you reach the Windows 2000 Repair Options page, press R again.
You'll then be prompted to select a repair option. Press M for Manual. Then press the Up Arrow until Verify Windows 2000 system files is highlighted; press Enter to clear this selection. Press the Down Arrow to select Continue (perform selected tasks), and then press Enter.
The system will ask whether you have an emergency repair disk. Press L, indicating it should Locate your existing installation. Once it does so, press Enter to complete the repairs. This will establish dual boot for you. (This procedure also works for Windows XP.)
*NOTE:
Don't know if this will also work for Linux. If anyone does try it, please let me know.
I want to run both Windows 2000 Pro and Windows 98 SE on my computer. When I bought a new hard drive, I installed Windows 2000 on it first. But my subsequent research seems to indicate that I should have installed Windows 98 SE first and then Windows 2000 on a separate partition. How do I remove Windows 2000 from the drive so I can partition it and then install Windows 98 SE first and reinstall Windows 2000?
You don't have to remove Windows 2000. Start by installing Windows 98 SE in a different partition. When you're done, insert the Windows 2000 CD and reboot to start Windows 2000 setup. On the Welcome to Setup page, press R (for Repair). When you reach the Windows 2000 Repair Options page, press R again.
You'll then be prompted to select a repair option. Press M for Manual. Then press the Up Arrow until Verify Windows 2000 system files is highlighted; press Enter to clear this selection. Press the Down Arrow to select Continue (perform selected tasks), and then press Enter.
The system will ask whether you have an emergency repair disk. Press L, indicating it should Locate your existing installation. Once it does so, press Enter to complete the repairs. This will establish dual boot for you. (This procedure also works for Windows XP.)
*NOTE:
Don't know if this will also work for Linux. If anyone does try it, please let me know.
Posted under:
How to create Important files using DOS.....
Here is trick for the DOS user who are not having Boot Dos Disk, No Edit.com ...
Hello Dos friends...
This is a simple but most forgotton command to create
files like config.sys and autoexec.bat files, well heres it...
Even if u dont have a dos boot disk u can work ur way
to some extent.
********************************************
At c:\ prompt
type
copy con config.sys
devicehigh=c:\dos\himem.sys
device=c:\dos\setver.exe
devicehigh=c:\dos\emm386.exe ram
dos=high,umb
last drive=z
then press CTRL + z
press enter
Config.sys file will be created.
********************************************
Similarly u can create autoexec.bat
@echo off
prompt=$P$G
path=c:\dos;c:\
lh mouse
lh doskey
Press CTRL + Z
**********************************************
Here is trick for the DOS user who are not having Boot Dos Disk, No Edit.com ...
Hello Dos friends...
This is a simple but most forgotton command to create
files like config.sys and autoexec.bat files, well heres it...
Even if u dont have a dos boot disk u can work ur way
to some extent.
********************************************
At c:\ prompt
type
copy con config.sys
devicehigh=c:\dos\himem.sys
device=c:\dos\setver.exe
devicehigh=c:\dos\emm386.exe ram
dos=high,umb
last drive=z
then press CTRL + z
press enter
Config.sys file will be created.
********************************************
Similarly u can create autoexec.bat
@echo off
prompt=$P$G
path=c:\dos;c:\
lh mouse
lh doskey
Press CTRL + Z
**********************************************
Posted under:
How to disable Windows Logo key, i was recently playing games and this nasty windos logo key keep annoying me , cause i often accidently clicked it , and i start to search a solution to solve my problem, and found the following article in microsfot website, and it did work, hope this helps, thanks! click here or in other articles, u can copy the following messages into ur notepad and save as *.reg, and use it..
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
"Scancode Map"=hex:00,00,00,00,00,00,00,00,03,00,00,00,00,00,5b,e0,00,00,5c,e0,\
00,00,00,00
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Keyboard Layout]
"Scancode Map"=hex:00,00,00,00,00,00,00,00,03,00,00,00,00,00,5b,e0,00,00,5c,e0,\
00,00,00,00
Posted under:
